Wednesday, September 7, 2011

Stage Safety Special Report from CX-TV

An expert panel discusses the Indiana stage collapse, Pukkelpop disaster, Ottawa Bluesfest stage collapse and the German Love Parade deaths.
Panel members:
Michael 'Shackles' Kent, AVERT Risk Management/ASSURE Event Safety
Roderick van Gelder, Stage Safety Pty Ltd
Travis Semmens, Aust. Concert & Entertainment Security
Richard Matheson, Engineer, VDM Consulting
Iain 'Spud' Barclay, ESS Australia
Moderated by Julius Grafton and produced at the Sydney Australia CX-TV News studio on Tuesday, August 30, 2011.

This Industry Special report does not have ad breaks. VIEW HERE NOW.

Tuesday, September 6, 2011

Tread Lightly - and don't bust your butt doing it

I continue to find more and more amazing steps and stairs both backstage and in the audience chamber that don't comply with ADA and NFPA Life Safety Code requirements for clearly marking the edges of steps.  sMany of these are in brand new buildings - why are code inspectors and architects not addressing this?

The ADA (Americans with Disabilities Act) places great emphasis on the need for people to clearly see the edges of floor transitions.  The ADA guidelines and rules are not just about preventing and marking bumps under wheelchair wheels!   It is about all of us needing to see under low-light conditions, and these conditions occur in many places outside of the theatre, too.
  • When light levels are low our vision becomes monochromatic (black and white, or really shades of gray), so there is less information for our brain to process.  Strike One.
  • We usually don't look directly where we are going to step, we rely on our peripheral vision, which is much less detailed than our central cone of vision.  Strike two.
  • Where we step is largely governed by out sense of where we think our feet are going, and a large dose of trust that the destination is safe (i.e. flat, level, and large enough to stand upon).  If it's not, then Strike 3.
  What you (don't) see above is the two steps leading down from a sort platform stage into the front cross-aisle.  And no, the dark-gray to light-gray transition is not the step.  It's like (not) seeing a polar bear in a snowstorm.  And that is with the houselights UP.  Imagine this in the dark with black and-white vision . . .

At left is a stairwell in the catwalk system.  The picture was taken with a flash so it appears much brighter than the actual working space.  Black steps with no contrasting edges, and the step treads are only about 8" front to back, not hardly enough to plant your foot on when you are going up them in a size 11 work boot, and very difficult to get a feel for when descending in the dark - your toes want to fall right on over the edges that you can barely see.

The diamond plate tread pattern can be helpful if you have a coarse tread work shoe, but if there is very much dust build-up it can still be quite slippery.

One way to retrofit steps for traction and visibility is to add a stair nosing assembly that has both traction grit and a  photoluminescent  strip combined.  The GBC ST-1001 Bull Nose Stair Nosing is a good example of this type of product.

GBC makes another product that has a slide-in media slot that can be used for decorative inserts or possibly a paid advertising space and generate revenue resource for a venue.

Monday, September 5, 2011

Boom - Boom: Out Go The Lights



Emergency Lighting Systems have come a long way in the past few years.  Both LED and battery technology have improved significantly, so it is much easier to obtain brighter and longer lasting illumination of signs and emergency egress routes.  In the US we typically refer to both local building codes, the NFPA 101 Life Safety Code Chapter 7 and NFPA 70 National Electric Code Article 700.  In the UK there is BS 5266.

Hochiki Europe has put together a great little guide book that shows where and how Emergency Lighting should be deployed in a facility.  The guide book can be downloaded here:

www.hochikieurope.com/bs5266/Hochiki%20Europe%20BS5266%20Guide%20Booklet.pdf

Although the BS 5266 standards are slightly different than the US standards, this is still a good example guide to read for US venue operators as the basic principles are well documented and the graphic examples are clear and concise.

One of the leading failures of many emergency lighting systems is the battery.  If the battery system is not maintained and tested they can fail to perform.  The lights must be tested regularly, and they must be operated under emergency power for an extended time to ensure that when called upon they will light the way for safe egress from a facility.

The example above shows corroded battery cells with low electrolyte levels.

Friday, September 2, 2011

Emergency Flashlight for Preparedness . . . where did I put that !?

The Panasonic BF-541 Emergency Light, which is powered by two D-cell replaceable batteries (sold separately), can be easily wall-mounted anywhere fast access to lighting is needed. An automatic switch feature turns the Emergency Light ON automatically when removed from its holder.  The light will glow up to 18 hours with its high-luminance krypton bulb when used with alkaline cells. If you replace the lamp with an LED you can probably extend the run time further (why didn't they think of that?)

To save battery power when not in use, the battery is disengaged and the light goes OFF when returned to its holder. Because there is no switch, it encourages users to return it to a location where it might be found by others rather than just laying it down and forgetting about it.  The exterior case of the flashlight also has a little  photoluminescent  marking dot which glows in the dark, making it a wee bit easier to find when the lights go out.  I think I'd put a BIG honking strip of photoluminescent tape down the side to make sure that it is visible.
Other flashlights of interest might be:
http://theatresafetyblog.blogspot.com/2010/02/jumpin-jack-flashlight.html
http://theatresafetyblog.blogspot.com/2010/02/were-dark-on-mondays-and-when-power.html

Monday, August 29, 2011

TheatreFace Video Chat - Wednesday August 31 at 11 AM Pacific Time

This week TheatreFace checks in with the people who keep everything safe up there -- the riggers.  On Wednesday, August 31 at 2 p.m. Eastern / 11 a.m. Pacific we'll be chatting with reps from J.R. Clancy and TheatreFace.com blogger (and Teqniqal Systems theatre safety consultant) Erich Friend. We'll be discussing what exactly a rigging inspection means, and why they're important.

Video at: www.ustream.tv/recorded/16990352


Video streaming by Ustream

Wednesday, August 24, 2011

Event Safety Guides - Freebies

The UK Health and Safety Executive (HSE) publishes The Event Safety Guide.  First authored in 1993, it has been updated and reformatted for easier reading in the Second Edition.  Also Known as "The Purple Guide".  Available here:
www.hse.gov.uk/pubns/priced/hsg195.pdf

Overview

Revised to align with recent law changes and event industry best practice. Provides 'tried and tested' advice on which to organize health and safety at music events, although many chapters may also apply to other gatherings sharing similar characteristics. Intended to enable organizers, local authorities, emergency services and HSE to work together to improve safety. As such, this guidance was devised in consultation with an event industry working group. In addition to broader safety headlines, such as venue and site design, fire procedures and major incident planning, the guidance also scopes pertinent circumstantial issues. Accordingly, specifics like transport, barriers, electrics, refreshments, merchandising, amusements, attractions, sanitation, noise, vibration and many other relevant subjects are also considered.

This supersedes the 'Guide to health, safety and welfare at pop concerts and similar events.'
---------------------
Safe Use and Operation of Temporary Demountable Fabric Structures is a guide book put together by MUTA and is available here:







---------------------

HSE Managing Crowds Safely (web page): www.hse.gov.uk/pubns/indg142.htm
Event Safety Solutions Blog:  http://eventsafetysolutions.wordpress.com/
The Special Event Guru Blog:  http://specialeventguru.blogspot.com
IAVM Trained Crowd Manager Course (NOT Free, but worth every penny!):

Tuesday, August 23, 2011

Safety Standards Protect Workers — Improve Productivity


The American National Standards Institute, Inc. (ANSI) publishes safety standards for the workplace.  These standards are key to ensuring worker safety, protecting the environment, and improving productivity.

You can find standards for ladder safety, construction, clothing, equipment, workplace surfaces, signage, occupational health, fire safety, handling of chemicals and gases, labeling and safeguarding standards for equipment, noise, and vibration, and more at www.webstore.ansi.org/safety_standards.  Download individual copies or explore multi-user site licenses.  If you are part of a school or university system, they may already have a site license that you can benefit from.
Searches are available for a wide range of safety standards from these organizations:
  • American Ladder Institute (ALI)
  • American Society of Safety Engineers (ASSE)
  • American Society of Testing and Materials (ASTM)
  • National Eletrical Equuipment Manufacturer's Association (NEMA)
  • National Fire Protection Association (NFPA)
  • International Standards Organization (ISO)
  • International Safety Equipment Association (ISEA)
  • American Industrial Hygiene Association (AIHA); and many others.